LED Bulbs, we can use in homes and parking areas. In the villages they are using as street lights also. As per the present market the price of 9w LED bulb is starting from Rs. 25/- to Rs. 150/-. People will surprise when they see the price variation, but this price variation is depend upon different types/models/shapes of bulbs. Here are the few types

GLO LED Bulbs are best suitable for home and commercial use.  Here are important things you should know about out bulbs

The bulbs installation is generally very simple and straight forward.  You should know that there are two types of end caps for the bulbs.  One is called B22 cap or pin type cap.  Other is called E27 or thread type cap.

Turn off the power source.  To install, bulb, you need to place your replacement LED bulb in the fixture and screw it into place. Be sure to turn the bulb slowly so that it goes down evenly onto the threads of the fixture’s screw cavity.  You will want to tighten the bulb as much as you can without damaging it. Do not squeeze the bulb very hard as you put it into place.

• High lumen compared to market bulbs
• Uniform Light Distribution
• Diffuser for Eye friendly lighting
• Upper cutoff voltage protection in Prime Model
• 3 step dimming and 3 in 1 color
• Long backup upto 4 hours
• IP65 rated bulbs*
• UVC Bulbs for sterilization
• *only for selected model

• Indoor, Parking areas, Gate Lights, Bollards, Post Lamp

• LEDs specification
  • 2835 padding
  • 50000 hours of life
  • Aluminum body for faster heat dissipation
  • 180° to 270° light spreading angle
• PCB specification
  • Aluminum of 1mm thick
  • Copper of 35 micron
• Driver specification
  • HPF, LPF, RC and DOB Drivers
  • Surge protection of 2.5 KV
  • Voltage range 180 to 260
  • Power Factor > 0.9

Holders of type B22, E27.  Hanging kit